How to Remove Rust from a Gun in # Simple Steps

Rust on guns leads to issues of friction and loss of integrity. Rust creates a rough surface on guns and can lead to drag. Drag is terrible for the moving parts of a gun, as the rust prevents the smooth operation of a gun and its reliability. Drag can also occur within the barrel, which causes additional pressure inside the barrel and chamber when the gun is fired.

The truth of the matter is that corrosion resistant firearms need various forms of maintenance to keep them from rusting. All guns can rust, but it need not be that way. There are preventative measures that can stop oxidation from happening. If folks can put a stop to rust long before it happens, most hunters and firearm enthusiasts will no longer need to know how to remove rust from a gun.

It's essential to keep your guns in a climate-controlled environment. To prevent initial levels of rust from occurring on your gun, you should be sure to keep the air as dry as possible where your store your firearms. Also, be aware of where you live: your living conditions dictate the level or care and methods needed to stop your gun from rusting.

It's good practice to avoid your gun from coming in contact with any untreated material. Contact with outside elements and materials over time could cause gun rust or corrosion to occur. If you really want to stop the rust in its tracks, be sure your firearm is properly cleaned and lubed up good. Basically, you need to keep your gun clean so it doesn't rust. Dirt and grime tend to build up on unkept guns that just sit there. The areas on a firearm with this grime cannot adequately be lubricated and protected.

Gun safes keep the irresponsible and reckless away from your guns. Gun safes are safe, especially when there are children around. It's important to keep pistols, rifles, and shotguns under lock and key, and these gun safes are a great solution to some of our worst fears. However, these gun safes also create the perfect situation for guns to rust.

It's common for a gun to sit untouched inside a safe for years. Some people hardly use their guns and others just have so many guns they can't pay all of them the proper attention. Either way, guns left in storage with little or no maintenance have the potential to rust and corrode even from inside a safe.

A great preventative measure people take to keep guns from rusting is dehumidifying the room where the firearms are stored. A dehumidifier keeps the air dry, and dry air can stop gun rust in its tracks before you can say how do I remove rust from a gun. Gun safe dehumidifiers are available that provide an additional layer of protection for your gun from rust.

Once you've cleared your weapon and prepared an area to do the rust removing, it's time to remove that rust. The first step is applying the 3-and-1 oil liberally to the firearm. Zero in on the most prevalent areas of rust, but don't forget to oil the gun's metal in its entirety.

The AP brush is designed with your gun's finish in mind. The bristles are meant for some down and dirty scrubbing capable of loosening and removing rust; yet they're soft enough to ensure the heavy scrubbing will not damage your gun's metal. Use the AP brush to scrub your weapon's metal and focus on the rusted areas, mindful that only the bristles contact the gun and not the brush's plastic. Feel fry to apply more oil as needed while you scrub.

Undoubtedly your gun will be layered with a mixture of rust and 3-and-1 oil, which can make it hard to see the areas of rust on your gun. For better clarity, use the good rag or paper towels and wipe away the dirty oil. Sometimes just these first three steps will remove all the rust from your gun; however for the guns with severe rust, more rust removal steps are needed.

Heavy rust can be stubborn, but you can get rid of it with some patience. Apply a layer of oil to the gun, focusing on the rusted areas, and—instead of scrubbing with the AP brush--slow your role and take a deep breath. Let that oil sit and soak for a few minutes. Gun experts will tell you to leave it on until the rust is ready to come off. We recommend you let the oil sit for at least one hour. For serious rust, it might not be a bad idea to let the oil sit on your gun overnight.

Important note: do not use a steel brush for this step. We know it's tempting, but it will destroy your weapon's finish. Let the lessons of others guide you as you learn about how to remove rust from a gun. Stick with the softer steel wool. Press the steel wool down with your index finger and move it over the remaining gun rust. Rub the steel wool against the gun with your finger, making little circles.

Be sure to keep wiping away the dirty oil while using the steel wool. You'll soon discover the rust on your gun is gone or leveled down nicely. At this point, you'll know how to remove rust from a gun and should be satisfied with your results.